An independent beginner's guide to home 3D printing. It does not sell printers or materials, does not print to order and is not connected with the former site on this domain.

Tools

Tools

You don't need a workshop for a printer to work predictably. A few simple things kept close at hand are enough: they help you remove finished parts, check dimensions, look after your material and protect yourself. Below are six such helpers. None of them requires special skills, but together they spare you most of the annoying failures.

The most underrated tool in home printing is a notebook where you write down what you changed and what came of it.

— From the editors

What is described here: items and techniques in general terms, without brands or models. The manufacturer's instructions will tell you which of them matter for your particular printer and material.

What comes in handy

A small kit that covers most everyday tasks around a home printer.

Bed scraper and brush

A thin scraper helps you gently lift a cooled part, and a soft brush clears crumbs and bits of filament from the bed. Push the scraper away from you at a shallow angle so you don't scratch the surface or hurt yourself.

Guides

Calipers

You use them to measure the object a part is being printed for, and to check what came out. Without accurate measurements a lid won't fit and a hook won't go into its hole, even if the print went perfectly.

Problems

Dry box for filament

Many filaments absorb moisture from the air, and printing with damp material gives a rough surface with bubbles and strings. A closed container with desiccant helps keep spools dry between prints.

Comparisons

Gloves and goggles

You must not work with liquid resin without them: it irritates the skin and is dangerous for the eyes. Gloves are also useful when washing parts, and goggles when breaking off supports that may fly off.

Safety

Good ventilation

Printing smells of heated plastic, and resin has a noticeable odour. Put the printer in a room that is easy to air out, and don't set up your workspace in a bedroom or a child's room.

Safety

Print log

A notebook or file where you record the material, main settings, duration and outcome of each print. After a few weeks the log turns into a personal reference that tells you where to start.

Guides

Habits that save material

Before every print, run a brush over the bed and wipe it the way the manufacturer recommends. Grease from fingers is one of the most common reasons the first layer won't stick.

Put an opened spool of filament back in the dry box right after printing, not the next day. Keep resin closed, in the dark and away from children and pets.

Record failures in the log as well as successes. A broken part with a note on what went wrong is more useful than a perfect one you remember nothing about.

  • Guides

    Step-by-step advice: preparing the file, first print, calibration, removing supports, useful things for the home. The article catalogue is here too.

  • Comparisons

    Filament versus resin printing, PLA, PETG and photopolymer resin, your own model versus a ready-made file from the web: strengths and weaknesses.

  • Problems

    First layer not sticking, stringing, layers separating, corners curling up, a clogged nozzle, a part that comes out the wrong size.

  • Safety

    Hot parts, fumes and dust, liquid resin, printing unattended, children and pets nearby, the rights of model authors.

  • Questions

    Answers about the guide, about printing and materials, about safety at home and about respecting the rights of model authors.

Sources

  • Overview of the history of additive manufacturing (Wevolver)
  • Printer and material manufacturers' instructions (in general terms)

This guide describes home printing in general terms and reflects the editors' view on the date it was prepared. Printers, filaments and resins all work differently, and menu items in model preparation software go by different names. If the instructions for your printer or material say otherwise, follow the instructions.