An independent beginner's guide to home 3D printing. It does not sell printers or materials, does not print to order and is not connected with the former site on this domain.

Safety

Safety

A home printer is an appliance with heating, moving parts and, in the case of resin printing, a liquid chemical material as well. There is nothing frightening about this if you treat it with the same care as an iron or a soldering iron. This section covers the everyday risks everyone who prints at home faces, and the simple habits that reduce them. We also look separately at how to respect other people's work if you print models by other authors.

The safest place for a printer is one where you can see it, where it's easy to open a window and where small hands and paws can't reach.

— From the editors

What this section covers: the everyday risks of home printing in general terms. The exact requirements for your printer and material are given in its instructions and the material description; read them before your first print.

Risks

Six situations worth remembering every time the printer is running.

Hot nozzle and bed

During printing and for some time afterwards the nozzle and bed stay hot. Don't touch them, don't remove the part straight away and don't clean the nozzle until it has cooled, unless the instructions say otherwise.

Problems

Fumes and dust: ventilation

Heated plastic and resin give off odours, and sanding raises fine dust. Ventilate the room during and after work, don't put the printer where people sleep, and sand wearing a mask or with water.

Tools

Liquid resin on skin

Uncured resin irritates the skin and is dangerous for the eyes. Work with it in gloves and goggles, wash off accidental drops straight away as the material's safety notes advise, and don't pour leftovers down the sink.

Comparisons

Printer left unattended

A printer heats up and runs for hours, so don't start a print and leave the house. Keep clear space around it, don't put flammable things right next to it, and check regularly on how the job is going.

Guides

Children and pets nearby

Curious hands and paws reach for moving parts and hot surfaces. Put the printer up high or in an enclosed corner, and store resin, cleaning solutions and sharp tools where children and pets can't get to them.

Questions

Other people's models and authors' rights

A model from the web belongs to its author. Read the licence, credit the author if it requires that, don't sell prints without permission and don't print other people's trademarks for sale.

Questions

If something goes wrong

If the printer smokes, sparks or smells of burning, stop the print and unplug it. Don't open the power supply casing or try to repair the electronics yourself: that is what a service centre and the manufacturer's instructions are for.

If resin gets on your skin, wash it off as described in the material's safety notes. If it gets in your eyes, or your skin turns red and hurts, rinse and seek medical help, taking the packaging or description of the resin with you.

Respecting model authors

Ready-made models on the web are created by real people, and each comes with terms of use. Some authors let you do anything with the file, others allow printing for personal use only, and others ask that you always credit them. Reading a licence takes a minute, and respecting other people's work helps more free models appear.

Images of other people's trademarks and recognisable products made by others must not be printed for sale without the rights holder's permission. For yourself, it's better to choose models that authors have released for free use, or to design your own, which is also excellent practice.

  • Tools

    Bed scraper and brush, calipers, a dry box for filament, gloves and goggles, ventilation and a print log.

  • Guides

    Step-by-step advice: preparing the file, first print, calibration, removing supports, useful things for the home. The article catalogue is here too.

  • Problems

    First layer not sticking, stringing, layers separating, corners curling up, a clogged nozzle, a part that comes out the wrong size.

  • Comparisons

    Filament versus resin printing, PLA, PETG and photopolymer resin, your own model versus a ready-made file from the web: strengths and weaknesses.

  • Questions

    Answers about the guide, about printing and materials, about safety at home and about respecting the rights of model authors.

Sources

  • Safety notes on working with photopolymers (in general terms)
  • Printer and material manufacturers' instructions (in general terms)

This guide describes home printing in general terms and reflects the editors' view on the date it was prepared. Printers, filaments and resins all work differently, and menu items in model preparation software go by different names. If the instructions for your printer or material say otherwise, follow the instructions.