An independent beginner's guide to home 3D printing. It does not sell printers or materials, does not print to order and is not connected with the former site on this domain.

Glossary

Glossary of terms

Printer manuals and model preparation software are full of words that sound like professional jargon at first. In reality they stand for simple things. Below are ten concepts that make a convenient start to getting to know home printing: from the names of printing methods to what happens to a part after the printer has stopped.

Understanding what infill and supports are is more useful than remembering dozens of settings: the rest comes with experience.

— From the editors

How to use the glossary: the terms are grouped into three topics: printing methods and files, the printing process, and printer parts and finishing.

Printing methods and files

FDM
Printing with molten filament: the printer heats a plastic filament, pushes it through a nozzle and lays it down layer by layer. This method was patented by Scott Crump in 1989. It is the most common type of home printing.
Resin printing
A method in which light hardens liquid resin in thin layers. It gives a smooth surface and fine detail but requires gloves, goggles, ventilation and finishing of the part after printing. Stereolithography, on which this approach is based, was patented by Charles (Chuck) Hull, with the patent dated 1986.
STL
A common file format for 3D models: the surface of a part is described by many small triangles. Charles Hull is credited with creating this format. These are the files most often opened in a slicer.
Slicer
Software that cuts a 3D model into layers and turns them into commands for the printer. In it you choose the material, layer height, infill and supports, and view a preview of the print.

The printing process

Layer
A thin horizontal slice of a part. The printer builds an object by laying one layer on top of another. The thinner the layer, the smoother the surface, but the longer the print takes.
Infill
The internal structure of a part between its walls, usually in the form of a grid. Sparse infill saves material and time; dense infill makes the object stronger and heavier.
Supports
Temporary props the printer builds under overhanging parts of a model so they don't sag in mid-air. After printing, the supports are removed and the marks they leave are cleaned up.
First layer
The very first layer, laid directly on the bed. How evenly and firmly it goes down determines whether the part stays put until the print is finished, so it deserves the closest attention.

Printer parts and finishing

Nozzle
A small metal tip through which the molten filament comes out. The nozzle is very hot during operation, and a clog in it is one of the common reasons plastic stops feeding.
Post-processing
Everything done to a part after printing: removing supports, sanding, priming and painting. Resin parts are washed and post-cured beforehand, wearing gloves.
  • Guides

    Step-by-step advice: preparing the file, first print, calibration, removing supports, useful things for the home. The article catalogue is here too.

  • Comparisons

    Filament versus resin printing, PLA, PETG and photopolymer resin, your own model versus a ready-made file from the web: strengths and weaknesses.

  • Problems

    First layer not sticking, stringing, layers separating, corners curling up, a clogged nozzle, a part that comes out the wrong size.

  • Tools

    Bed scraper and brush, calipers, a dry box for filament, gloves and goggles, ventilation and a print log.

  • Questions

    Answers about the guide, about printing and materials, about safety at home and about respecting the rights of model authors.

Sources

  • Overview of the history of additive manufacturing (Wevolver)
  • Printer and material manufacturers' instructions (in general terms)
  • Editorial materials of the guide

This guide describes home printing in general terms and reflects the editors' view on the date it was prepared. Printers, filaments and resins all work differently, and menu items in model preparation software go by different names. If the instructions for your printer or material say otherwise, follow the instructions.